Optical fiber laser equipment research technology enterprise

中文 Counseling hotline:400-155-6188

Shenzhen Sunrise automatic laser equipment manufacturer

Laser welding machine equipment

Double station rotary fiber laser welding machine

Category:Laser welding machine equipment

Abstract: Sunrise Laser CHD-1000W-CW double-station rotary laser welding machine adopts 1000W fiber laser, which has high electro-optical conversion efficiency and long laser life. The energy supplied by the power source is 25%-30% converted into laser energy, which is a laser with high current conversion energy.

National Advisory Service Hotline:400-155-6188

PurchaseConsulting

  • Product introduction
  • Product parameters
  • Sample picture
  • Related video

Double station rotary fiber laser welding machine

Double station rotary fiber laser welding machine

Double station rotary fiber laser welding machine



Double station rotary fiber laser welding machine

  Sunrise Laser CHD-1000W-CW double-station rotary laser welding machine adopts 1000 watt fiber laser, which has high electro-optical conversion efficiency and long laser life. The energy supplied by the power source is 25%-30% converted into laser energy, which is a laser with high current conversion energy. Open-type double-station laser welding work platform, intelligent operation: machine, water, electricity, gas integrated anti-static type; configuration CCD liquid crystal monitoring and observation system , is conducive to maintenance and installation, with switch protection device and alarm light display, reserved T-clamp chute with additional chiller cooling unit. High work efficiency, twice the size of conventional laser welding machines.


Advantages of double-station rotary fiber laser welding machine

1. It adopts open double-station laser welding work platform, which can control 2 stations (A station, B station) and four-axis linkage by one person.
2. It can clean the cleaning medium to extend the life of the device and routine maintenance. More convenient; 
3, processing without pollution, small heat affected zone, small deformation; 
4, fine weld, large depth, small taper, high precision; smooth, flat, beautiful appearance; 
5, controlled by PC, special software assist; Easy to learn and easy to learn; can weld any pattern; 
6, no consumables, small volume; flexible processing, low running cost; 
7, CCD liquid crystal monitoring and observation system, can clearly observe product positioning and welding effect according to red light indication.


Fiber laser welding machine application range

  Used in the bathroom industry: faucet, water pipe joint, reducer joint, tee, valve; battery industry: lithium battery, battery pack, electrode laser welding; hardware industry: impeller, kettle, water cup, stainless steel bowl, sensor, diode, aluminum Welding of alloys, cell phone batteries, door handles, shelves, etc. It is mainly used for continuous welding of various metal products (copper, aluminum, titanium, stainless steel, low carbon steel, etc.).

Fiber laser welding machine?configuration parameters?:

1. A set of 1000W continuous lasers?;

2.?A set of precision welding heads?;

3. One laser fiber;

4. One 1.5P chiller;

5. A set of computer welding systems;

6, a set of fixtures;

7. A set of servo motors;

8, a set of 3600 control systems;

9, a set of CCD camera system;

10. One welding special goggles?.

Equipment model

CHD-1000W-CW type

Laser

1000WJPT

Laser wavelength

1064nm

Average output power

1000W

Welding depth

0.1-2.5mm

Minimum spot

0.1mm

Fiber length

5-15m

rated power

3.5KW

Chiller cooling power

1.5P

electricity demand

220V?±?5V 50Hz/40A

Targeting

Red light plus CCD processing equipment

Related products

Order:Double station rotary fiber laser welding machine

  • Name
  • Cellphone
  • Email
  • Verifycode
_免费一级特黄大片 一级a做爰在免费线看 一级a做爰片365 一级a特大片